Closet Design in Mozaik for Cabinetmakers
The complete guide to designing closets in Mozaik — 32mm modular sections, toe and boring setup, hardware and interiors — plus the drag-and-drop PAC Closet Library shortcut.
Phill Anton |
Mozaik Guides
Closet Design in Mozaik for Cabinetmakers
-
PAC Closet Library vs Mozaik Closets V12: What's the Difference?
How the PAC Mozaik Closet Library differs from the default Closets V12 library: pre-built hardware, sections, pricing, and modular sizing set up for you.
Phill Anton |
-
Sharing a Panel Across a Depth Change in Mozaik (Without a Flip Operation)
Share one panel across sections of different depths in the PAC Closet Library for Mozaik without creating a flip operation — line up the line bore.
Phill Anton |
-
How to Add the Opening Letter to Mozaik Labels
How to add the opening letter (the A/B/C/D face-tab letter) to your Mozaik labels so the shop can match each closet part to the right opening.
Phill Anton |
-
Why Operations Aren't Showing in Mozaik 3D (and How to Fix It)
Holes and operations missing in Mozaik 3D? They're not lost. Turn on Show Operations in Layers to bring back boring, Titus connectors, and line bore.
Phill Anton |
-
Metal vs Wood Drawer Boxes in Mozaik Closets
Should you use metal or wood drawer boxes in Mozaik closets? PAC explains why 14-inch slides matter and how to swap drawer guides without breaking your boring.
Phill Anton |
-
How to Make Inset Drawer Fronts in the PAC Mozaik Closet Library
How to create an inset drawer front look in the PAC Mozaik Closet Library using product parameters and the inset formula — and the depth trade-off to plan for.
Phill Anton |
-
Keep your 15-inch (563H) drawer guides in the PAC Mozaik Closet Library
Yes — you can run 15-inch (563H) drawer guides with the PAC Mozaik Closet Library. Bump the drawer section to 16 inches deep and turn on drawer front adjusters.
Phill Anton |
-
How to Build a Mozaik Island with Panels and Sections (Single-Sided)
How to lay out a single-sided closet island in Mozaik using PAC's panels-and-sections method, plus when to choose it over full boxes.
Phill Anton |
-
How to Lay Out a Single-Sided Full-Box Closet Island in Mozaik
Lay out a single-sided full-box closet island in Mozaik: drop an end panel, full boxes, cap it, then position the back panel by width and wall position.
Phill Anton |
-
Hardware & Accessories for Mozaik Closets (PAC Recommendations)
PAC's recommended fasteners, shelf pins, LEDs, hinges, and accessories for building closets with the Mozaik PAC Closet Library.
Phill Anton |
-
Full Backs in Mozaik Closets: Insert Backs vs Wall Liner
Two ways to add full backs to Mozaik closets with the PAC Closet Library: insert backs vs lining the wall — when to use each and how to set them...
Phill Anton |
-
How to Build a Double-Sided Closet Island in Mozaik (Full-Box Method)
Build a double-sided closet island in Mozaik with the PAC Closet Library full-box method: double end panels, mixed front/back depths, and aligned sections.
Phill Anton |