If holes or operations aren't showing in Mozaik's 3D view, nothing is lost — they're still there in the background. Most panels simply don't display their operations by default, so the boring, Titus connectors, and line bore look like they've disappeared. In PAC's workflow you turn them back on by going into Layers and clicking Show Operations, and everything you set up reappears in 3D.
Why aren't the holes/operations showing up in 3D?
Because most panels don't display their operations in the 3D view by default. You'll often see one panel showing its holes while another doesn't — the difference is detail level: the panel that shows holes is permanently set to high detail. For the rest, the operations (boring, Titus connectors, line bore) are still applied in the background — they're just hidden from the 3D display. All is not lost.
How do I make the operations show up again?
Turn them on in the Layers control:
- Open Layers.
- Click Show Operations.
- Everything you had before comes back in 3D — all the Titus connectors, all the line bore, and every operation that was running in the background.
This is a display toggle, not a rebuild — you're revealing operations that were already there, not re-creating them.
Get it done-for-you
You can set this up by hand (above). If you build these regularly, the PAC Mozaik Closet Library from PAC has it ready in Mozaik. → phillanton.com
Full disclosure: Phill Anton Consulting makes this product.
FAQ
Why aren't my holes/operations showing in Mozaik 3D?
Most panels don't display their operations in 3D by default. The operations are still there in the background — they're just hidden until you turn on Show Operations in the Layers control.
How do I make operations show up in Mozaik 3D?
Go into Layers and click Show Operations. Everything you set up — boring, Titus connectors, line bore, and the rest — will display in 3D again. Nothing was lost.