Closet Design in Mozaik for Cabinetmakers
The complete guide to designing closets in Mozaik — 32mm modular sections, toe and boring setup, hardware and interiors — plus the drag-and-drop PAC Closet Library shortcut.
Phill Anton |
Mozaik Guides
Closet Design in Mozaik for Cabinetmakers
-
How to Choose Drawer Guides in Mozaik Closets
How to switch drawer guides in the PAC Closet Library for Mozaik, plus why 14-inch-deep closet sections need 14-inch guides — and what to do when they don't fit.
Phill Anton |
-
Angled Shoe Shelf Insert in Mozaik: The Auto-Adjusting PAC Insert
Use PAC's auto-adjusting angled shoe shelf insert in Mozaik: one insert sizes itself to the opening, picks the fence brand, and pre-drills every hole.
Phill Anton |
-
How to Draft a Walk-In Closet in Mozaik with the PAC Closet Library
Phill Anton walks through drafting a wide walk-in closet in Mozaik with the PAC Closet Library: job setup, sections, a hutch, pricing, and the cut list.
Phill Anton |
-
How to Set Up Axilo Adjustable Feet in Mozaik
How to turn on Axilo adjustable legs for the PAC Closet Library in Mozaik, fix outrigger collisions, drop panels off the floor, and clear leg overrides.
Phill Anton |
-
Angled Shoe Shelves in Mozaik (PAC Closets)
How to add and configure angled shoe-shelf inserts in Mozaik using the PAC Closet Library — pick a shoe-fence brand, match the hole spacing, then save them globally.
Phill Anton |
-
CAM Construction in the PAC Closet Library (Mozaik)
The PAC Mozaik Closet Library uses Titus 6 CAM connectors — a 20mm and 10mm hole that line up automatically. How it works and how to check it.
Phill Anton |
-
Mozaik Corner Section: Changing Parameters and Building Interiors
How Phill Anton edits PAC Closet Library corner-section parameters in Mozaik (corner radius, margin, section depths) and builds the interior with a hanging panel.
Phill Anton |
-
Why Your Corner Closet Rod Points Into the Wall in Mozaik (Corner True Left Fix)
Fix a corner closet rod that points into the wall in Mozaik: swap in the PAC Closet Library Corner True Left product so the rod sits in the correct section.
Phill Anton |
-
How to Add a Ledger Board in Mozaik Closets (PAC Closet Library)
How to turn on the bottom ledger board (nailer) on floor-standing units in the PAC Mozaik Closet Library, and optionally turn off the top nailer.
Phill Anton |
-
How to Lay Out a Corner Section in Mozaik (PAC Closets)
Phill Anton's basic layout for a closet corner section in Mozaik: left vs right, the 24-inch minimum, the cutout-radius notch, and setting depth.
Phill Anton |
-
How to Build Cubbies in Mozaik (PAC Closet Library)
Phill Anton's low-fastener method for building closet cubbies in Mozaik: a fixed shelf, vertical multi-splits, and adjustable line-bored shelves.
Phill Anton |
-
Modular Sizing and the 32mm System in Mozaik Closets (PAC Closet Library)
How the PAC Closet Library uses the 32 mm system and modular sizing: depths and heights snap to modular values, true line bore, first hole 68 mm from the front.
Phill Anton |
-
Floor Standing vs Wall Hanging Closets in Mozaik
PAC recommends floor-standing closets for a better look, faster install, and a cleaner result. Use wall-hanging only if you must install before the flooring goes in.
Phill Anton |