Closet Design in Mozaik for Cabinetmakers
The complete guide to designing closets in Mozaik — 32mm modular sections, toe and boring setup, hardware and interiors — plus the drag-and-drop PAC Closet Library shortcut.
Phill Anton |
Mozaik Guides
Closet Design in Mozaik for Cabinetmakers
-
PAC Closet Library vs Mozaik Closets V12: What's the Difference?
How the PAC Mozaik Closet Library differs from the default Closets V12 library: pre-built hardware, sections, pricing, and modular sizing set up for you.
Phill Anton |
-
How to Add the Opening Letter to Mozaik Labels
How to add the opening letter (the A/B/C/D face-tab letter) to your Mozaik labels so the shop can match each closet part to the right opening.
Phill Anton |
-
Metal vs Wood Drawer Boxes in Mozaik Closets
Should you use metal or wood drawer boxes in Mozaik closets? PAC explains why 14-inch slides matter and how to swap drawer guides without breaking your boring.
Phill Anton |
-
How to Make Inset Drawer Fronts in the PAC Mozaik Closet Library
How to create an inset drawer front look in the PAC Mozaik Closet Library using product parameters and the inset formula — and the depth trade-off to plan for.
Phill Anton |
-
Keep your 15-inch (563H) drawer guides in the PAC Mozaik Closet Library
Yes — you can run 15-inch (563H) drawer guides with the PAC Mozaik Closet Library. Bump the drawer section to 16 inches deep and turn on drawer front adjusters.
Phill Anton |
-
Hardware & Accessories for Mozaik Closets (PAC Recommendations)
PAC's recommended fasteners, shelf pins, LEDs, hinges, and accessories for building closets with the Mozaik PAC Closet Library.
Phill Anton |
-
Full Backs in Mozaik Closets: Insert Backs vs Wall Liner
Two ways to add full backs to Mozaik closets with the PAC Closet Library: insert backs vs lining the wall — when to use each and how to set them...
Phill Anton |
-
How to Adjust Closet Sections (Drawers, Rods, Shelves) on Modular Fronts in Mozaik
How to resize sections and edit drawers, shelves, and rods on Mozaik modular-front closet sections, then save them back to your library.
Phill Anton |
-
Angled Shoe Shelves in Mozaik (PAC Closets)
How to add and configure angled shoe-shelf inserts in Mozaik using the PAC Closet Library — pick a shoe-fence brand, match the hole spacing, then save them globally.
Phill Anton |
-
CAM Construction in the PAC Closet Library (Mozaik)
The PAC Mozaik Closet Library uses Titus 6 CAM connectors — a 20mm and 10mm hole that line up automatically. How it works and how to check it.
Phill Anton |
-
How to Build Cubbies in Mozaik (PAC Closet Library)
Phill Anton's low-fastener method for building closet cubbies in Mozaik: a fixed shelf, vertical multi-splits, and adjustable line-bored shelves.
Phill Anton |
-
Modular Sizing and the 32mm System in Mozaik Closets (PAC Closet Library)
How the PAC Closet Library uses the 32 mm system and modular sizing: depths and heights snap to modular values, true line bore, first hole 68 mm from the front.
Phill Anton |